Shenzhen ThreeNH Technology Co., Ltd.
Leader Of Color Management In China
|Place of Origin:||China|
|Certification:||CE / ROHS / FCC / ISO9001:2015|
|Minimum Order Quantity:||1pcs|
|Price:||USD420~820 / SET|
|Packaging Details:||Packed in hard nylon box firstly, and then reinforced with carton box for outer packing|
|Delivery Time:||1~3 working days|
|Payment Terms:||T/T, Paypal, Western Union, L/C, D/P|
|Supply Ability:||5000pcs per month|
|Measuring Area (mm):||20°: 10x10 60°: 9x15 85°: 5x36||Measure Angle:||20° 60° 85°|
|Division Value:||0.1GU||Measuring Time:||0.1s|
|Operation Temperature:||0~40℃（32~104°F）||Humidity:||<85% Relative Humidity, No Condensation|
A gloss meter is a tester for determining surface gloss. With the gloss meter, spectral reflections of a light beam that hits the surface, are measured.
The gloss meter is applied especially in areas where it is important that the surfaces have the same structure, and have the same surface characteristics. This often happens in quality control. The gloss meter is a measuring instrument which can be used in many different industries.
A special evaluation software comes with the gloss meter 3NH-HG268. So the measured data can be stored on the device first and transferred to a computer later. The software of the gloss meter also has an analysis function that serves for precise evaluation.
- 20°, 60° and 85° in one: from high to low gloss - have the specified angle on hand
- One button for all angles measurement at the same location
- 3.5" TFT Panel, user friendly
- Built-in Li-ion rechargeable battery
- Internal data memory, up to save 1000 data
- Calibration plate supplied
- Fast measurement time
- With evaluation software
3NH-NHG268 is widely used in the industrie which are sensitive to the surface such as Paint,Paper,ink,Plastic,film,Bamboo,flooring,Stainless steel,Aluminum oxidation,Stone,Ceramic tile,Leatherwear...
|HG268 Tri-angle Gloss Meter|
|Comply with standard ISO 2813, GB/T 9754, ASTM D 523, ASTM D 2457|
|Measuring Area (mm)||20°: 10x10 60°: 9x15 85°: 5x36|
|Measuring Range||20°:0~1000GU 60°:0~1000GU 85°:0~160GU|
|Measurement Range||0-10GU 10-100GU 100-1000GU|
|Repeatability||± 0.1GU ± 0.2GU ± 0.2%GU|
|Reproducibility||± 0.2GU ± 0.5GU ± 0.5%GU|
|Measurement Standard||Conform with JJG696 first class glossmeter working requirement|
|Chromaticity Corresponding||Corresponding with CIE 1931(2°) under CIE C light source|
|Errors||±1.5 , ± 1.5%|
|Dimension||L*W*H : 160mm*75mm*90mm|
|Battery||3200mAh Li-ion Battery ,>10000 times(within 8 hours)|
|Display||TFT 3.5 inch|
|Storage||Basic mode: 1000|
|Software||GQC6 Quality Control Software with QC report printing functions and more extended functions.|
|Humidity||<85% relative humidity, no condensation|
|Standard Accessories||Power Adapter, USB cable, User Manual, GQC6 software CD (except HG60S), Calibration Plate|
|Optional Accessories||Miniature Printer|
|Note||The specifications are subject to change without notice.|
1 x Glossmeter 3NH-HG268
1 x Evaluation software
1 x Charging adapter
1 x USB cable
1 x Calibration plate
1 x Instruction manua
1-2 working days after payment received.
Carton Meas: 29*19*10CM
We warrant to you that any Product purchased from us will, on delivery and for the following 1 year, conform in all material respects with its description, be of satisfactory quality, and be reasonably fit for all the purposes for which products of that kind are commonly supplied.
Micro-printer / Ref. No.: 3NH-SP-A-01
Gloss is measured by shining a known amount of light at a surface and quantifying the reflectance. The angle of the light and the method by which the reflectance is measured are determined by the surface.
Gloss is measured using a Gloss Meter also known as a Glossmeter) which directs a light at a specific angle to the test surface and simultaneously measures the amount of reflection. The type of surface to be measured determines the gloss meter angle to be used and thus the gloss meter model.
The intensity is dependent on the material and the angle of illumination. In case of nonmetals (coatings, plastics) the amount of reflected light increases with the increase of the illumination angle. The remaining illuminated light penetrates the material and is absorbed or diffusely scattered dependent on the color.
Metals have a much higher reflection and are less angle dependent than non metals. The measurement results of a glossmeter are related to the amount of reflected light from a black glass standard with a defined refractive index, and not to the amount of incident light. The measurement value for this defined standard is equal to 100 gloss units. Materials with a higher refractive index can have a measurement value above 100 gloss units (GU), e.g. films.
In case of transparent materials the measurement value can be increased due to multiple reflections in the bulk of the material. Due to the high reflection capabilities of metals values of up to 2000 GU can be reached. For these applications it is common to document the measurement results in % reflection of the illuminated light. Glossmeters and their handling procedures had to be internationally specified to allow comparison of measurement values. The angle of illumination is of high influence. In order to obtain a clear differentiation over the complete measurement range from high gloss to matte, 3 different geometries, i.e. 3 different ranges, were defined using a 60° glossmeter.
|Gloss Range with 60° Gloss Meter||Measure With:|
|If Semi Gloss - 10 to 70 GU||60 °|
|If High Gloss > 70 GU||20 °|
|If Low Gloss < 10 GU||85 °|
In this case study, 13 samples were visually ranked from matte to high gloss and measured with the 3 specified geometries. In the steep slopes of the curves the differences between the samples can be clearly measured, while in the flat part the measurement geometry no longer correlates with the visual. Gloss measurement for any application, whether you are dealing with specific applications or need a universal solution for high to matte gloss samples, please contact us, we will offers a complete line of glossmeters.
To learn how to choose a glossmeter, please click here!
You may need
Shenzhen Threenh Technology Co., Ltd. is a high-tech enterprise. We research, develop, produce and market photoelectric detection products in photoelectric detection technology field and color management field.After years of intensice research, 3nh has launched NS series spectrophotometer and NH, NR series colorimeter, ISO12233 resolution test chart, optical image test solution and specific standard illuminant which are widely used in plastic, electronic, paint, ink, textile, garment, printing and dyeing, food, medical, cosmetic, optical image test industries and the field of scientific research, school and laboratory. Our products are exported around the world. We can provide customization service which has been well received by customers.
3NH cherishes talents, focuses on talents. Company brings together many of high-level, high educated professionals. Among them, undergraduate academic staffs of the total number of company accounted for more than 80%; postgraduate staffs of the total number of company accounted for 30%. It involves the fields of photometry, electronic circuit, embedded system, photoelectric detection, mechanical structure design, optical design, application software, lighting technology electronic commerce and internet. 3nh team has strong capability to design, develop and produce on its own. The company has a large number of innovation patents, core technologies and intellectual property rights of 3nh products.
3NH adheres to “people-oriented, customer first, technological innovation, sustainable development” business philosophy to meet customer demand continuously, to create value for customers and to achieve win-win situation and common development.
Shenzhen ThreeNH Technology Co., Ltd
Add:F/6, Block 5B, Skyworth Inno Valley, Tangtou 1st Road, Shiyan, Baoan District, Shenzhen China.
Tel: 0086-755-2719 8826 Ext: 639
Fax: 0086-755-2719 0609
Cell No.: 0086- 175 0309 7190