Shenzhen ThreeNH Technology Co., Ltd.
Leader Of Color Management In China
|Place of Origin:||China|
|Certification:||CE / ROHS / FCC / ISO9001:2015|
|Minimum Order Quantity:||1pcs|
|Packaging Details:||Nylon Carry Case with Gift Box|
|Delivery Time:||1 ~3 working days|
|Payment Terms:||T/T, Paypal, Western Union, L/C, D/A, D/P|
|Supply Ability:||5000pcs per month|
|Display:||TFT 3.5 Inch LCD||Interface:||480*320 USB/RS-232|
|Measuring Angle:||60°||Measuring Area:||9*15mm|
|Standard:||ISO 2813, ASTM D523, GB/T 9754, ASTM D2457||Measuring Range:||0-200GU|
The gloss-measuring device operates on the reflection principle by sending light from a known light source onto the surface to be tested and calculates the gloss level of the surface according to the reflection of light particles. The gloss level in gloss units (GU) is then output to the display of the gloss meter.With the gloss meter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy to use.
The gloss meter is applied especially in areas where it is important that the surfaces have the same structure, and have the same surface characteristics. This often happens in quality control. The gloss meter is a measuring instrument which can be used in many different industries.
A special evaluation software comes with the gloss meter 3NH-HG60S. So the measured data can be stored on the device first and transferred to a computer later. The software of the gloss meter also has an analysis function that serves for precise evaluation.
- Measuring Angle: 60°
- 3.5" TFT LCD Panel, user friendly
- Display 5 sets of measurement data, good for comparison
- Built-in Li-ion rechargeable battery
- Calibration plate supplied
- Fast measurement time
- High Cost-Effective
- With evaluation software
3NH-HG60S is widely used in the industrie which are sensitive to the surface such as Paint,Paper,ink,Plastic,film,Bamboo,flooring,Stainless steel,Aluminum oxidation,Stone,Ceramic tile,Leatherwear...
|3NH- HG60S Economic Gloss Meter|
|Comply with standard ISO 2813, GB/T 9754, ASTM D 523, ASTM D 2457|
|Measuring Area (mm)||9x15|
|Measurement Range||0-200GU ±1GU ± 1GU|
|Measurement Standard||Confirm with JJG696 first class glossmeter working requirement|
|Chromaticity Corresponding||Corresponding with CIE 1931(2°) under CIE C light source|
|Errors||±1.5 , ± 1.5%|
|Dimension||L*W*H : 160mm*75mm*90mm|
|Battery||3200mAh Li-ion Battery, >10000 times(within 8 hours)|
|Display||TFT 3.5 inch|
|Humidity||<85% relative humidity, no condensation|
|Standard Accessories||Power Adapter, USB cable, User Manual, Calibration Plate|
|Optional Accessories||Miniature Printer|
|Note||The specifications are subject to change without notice.|
1 x Glossmeter 3NH-HG60S
1 x Charging adapter
1 x USB cable
1 x Calibration plate
1 x Instruction manua
1-2 working days after payment received.
Carton Meas: 29*19*10CM
We warrant to you that any Product purchased from us will, on delivery and for the following 1 year, conform in all material respects with its description, be of satisfactory quality, and be reasonably fit for all the purposes for which products of that kind are commonly supplied.
Micro-printer / Ref. No.: 3NH-SP-A-01
How to choose the glossmeter?
You first require a flat surface of approximately 2" by 0.5" (50 x 10mm) to position a glossmeter properly on a surface. If the surface area you have is smaller, then please call us to discuss the Micopore gloss meter for 1.5 x 2mm areas.
One must now judge your product by how glossy it is. Most products fall into a semi gloss range. Some are matte and designed to have very low gloss and others such as metals or car finishes are very high. There are three types that cover the complete range of gloss, namely the 20 degree, the 60 degree and the 85 degree glossmeters. Certain industries however suggest a different angle. These industries are; paper, ceramic, film, and vinyl). If you fall into one of these industries, please read Gloss Meter Selection by Industry. Some customers produce a range of products from very glossy to matte, then you would require a Universal gloss meter that measures all three angles or maybe you only make products from semi gloss to very high gloss, than you need the 3NH-NHG268 degree gloss meter.
Low Gloss - 85°
For improved resolution of low gloss, a grazing angle of 85° is used to measure the surface. This angle is recommended for surfaces which measure less than 10 GU when measured at 60°.This angle also has a larger measurement spot which will average out differences in the gloss of textured or slightly uneven surfaces.
Medium or Semi Gloss - 60° - The Universal Measurement Angle
One must remember that all gloss levels can be measured using the standard measurement angle of 60°. This 60 degree angle is used as the reference angle for all products. So why choose some other another angle? Because for extreme gloss, one obtains better measurements with the complimentary angles of 85° or 20° often used for low and high gloss levels respectively.
High Gloss - 20°
The acute measurement angle of 20° gives improved resolution for high gloss surfaces. Surfaces that measure 70 GU and above at the standard angle of 60° are often measured with this geometry. The 20° angle is more sensitive to haze effects that affect the appearance of a surface. The different gloss of these two samples is more clearly shown in the 20° readings.
The 45 degree glossmeter is used primarily for the ceramics and film producing industries.
The 75 degree glossmeter is used primarily for the paper and vinyl producing industries.
Learn the Glossmeter in various industry, please click here.
You may need
Shenzhen Threenh Technology Co., Ltd. is a high-tech enterprise. We research, develop, produce and market photoelectric detection products in photoelectric detection technology field and color management field.After years of intensice research, 3nh has launched NS series spectrophotometer and NH, NR series colorimeter, ISO12233 resolution test chart, optical image test solution and specific standard illuminant which are widely used in plastic, electronic, paint, ink, textile, garment, printing and dyeing, food, medical, cosmetic, optical image test industries and the field of scientific research, school and laboratory. Our products are exported around the world. We can provide customization service which has been well received by customers.
3NH cherishes talents, focuses on talents. Company brings together many of high-level, high educated professionals. Among them, undergraduate academic staffs of the total number of company accounted for more than 80%; postgraduate staffs of the total number of company accounted for 30%. It involves the fields of photometry, electronic circuit, embedded system, photoelectric detection, mechanical structure design, optical design, application software, lighting technology electronic commerce and internet. 3nh team has strong capability to design, develop and produce on its own. The company has a large number of innovation patents, core technologies and intellectual property rights of 3nh products.
3NH adheres to “people-oriented, customer first, technological innovation, sustainable development” business philosophy to meet customer demand continuously, to create value for customers and to achieve win-win situation and common development.
Shenzhen ThreeNH Technology Co., Ltd
Add:F/6, Block 5B, Skyworth Inno Valley, Tangtou 1st Road, Shiyan, Baoan District, Shenzhen China.
Tel: 0086-755-2719 8826 Ext: 639
Fax: 0086-755-2719 0609
Cell No.: 0086- 175 0309 7190